Have you been hunting for ideas on What Would Cause My Electric Water Heater to Stop Working??
![No Hot Water — Water Heater Repair](https://www.erplumbing.com/wp-content/uploads/2015/02/20141017_115439.jpg)
Many modern-day homes make use of an electrical hot water heater for their heater, because of its benefit and convenience of use. Nevertheless, much like any other electrical appliances, problems might occur with its usage, all of a sudden. It can be truly discouraging to wake up to a cold shower instead of a warm one or having your bath with water that isn't hot adequate and even too warm. Whatever the situation may be, hot water heater issues can be rather nerve-racking. The good news is, we have actually made a list of feasible services to your water heater concerns. There are a number of variables that can create a lot of these troubles, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for safety and security. Whatever the issue is, getting it repaired ought to not pose too much of a problem if you comply with these actions:
Call A Professional:
If after replacing all damaged parts and also resetting your temperature level, the water heater still isn't functioning, you might require to contact a specialist plumber for a professional point of view. The problem with your heating system could be that the cold and hot faucets have been switched over or it may be undersized for the amount of hot water required in your home. Whatever the instance may be, a professional plumber would help solve the issue.
Inspect Your Power Supply:
As fundamental as this may appear, it is very needed. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the concern, simply turn it on and off again. Replace any type of busted or damaged fuse. Check the device with power after these changes to see if it's currently functioning.
Examine Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot sufficient, you might need to check the temperature settings on your upper thermostat. Make sure the breaker is turned off prior to doing anything. Open up the access panel and also press the red button for temperature reset above the thermostat. This should aid warm the water. Transform the breaker back on and check if the issue has been solved.
Examine the Burner in the Hot Water Heater:
If it's not a power trouble, after that attempt looking into your burner if it is still working. Test each of your heating elements to be sure the problem isn't with any of them. If any one of them is damaged, change that component and after that inspect whether the warm water is back on.
Final thought
Hot water heater issues are not always major. Many of them are due to small concerns like a blown fuse or damaged heating element. Changing the damaged components must work. Nevertheless, if you are still unable to solve the trouble, give a call to your local plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
![No Hot Water — Water Heater Repair](https://www.airandenergy.biz/wp-content/uploads/2020/07/broken-water-heater-1.jpg)
As an enthusiastic reader on How to Troubleshoot and Repair an Electric Water Heater, I imagined sharing that piece was mandatory. Sharing is caring. You just don't know, you could be helping someone out. Thanks for going through it.
Immediate relief? Contact.